FP∑ Positinoning Unit JOG Operation
8-13
8.6 Operation at Over limit Input
JOG operation is as follows when Over limit input (+) and Over limit input (-) is ON .
The operation is possible for the direction in opposite of the input limit.
Condition Direction Limit status Operation
Over limit input(+):ON Table not to move, Limit error occurs.
Forward
Over limit input (-):ON Table to move.
Over limit input (+):ON Table to move.
When JOG operation is
turned ON
Reverse
Over limit input (-):ON Table not to move, Limit error occurs.
Forward Over limit input (+):ON Table stops, Limit error occurs.
During JOG operation
Reverse Over limit input (-):ON Table stops, Limit error occurs.
To Next Page
Loading...
