75
VQT1H64
Editing
You can write the data of the still pictures to be
printed and the number of prints (DPOF data)
onto the SD card.
ª What is DPOF?
DPOF stands for Digital Print Order Format. This
enables picture printing information to be written
onto an SD card so that it can be used on a
system supporting DPOF.
¬Rotate the mode dial to select
and then select the [ ] (still picture
playback) tab.
1 Press the MENU button, then
select [PLAY SETUP] #
[DPOF SET] # [SET] and press
the cursor button.
2 Select the file to be set and then
press the cursor button.
The number of prints set to be in DPOF is
displayed.
3 Move the cursor button up or
down to select the number of
prints, then press the cursor
button.
≥ You can select from 0 to 999. (The selected
number of pictures can be printed with the
printer supporting DPOF.)
≥ To cancel the setting, set the number of prints
to [0].
≥ You can also select multiple files in succession.
To complete the settings
Press the MENU button.
To cancel all DPOF settings
Press the MENU button, then select
[PLAY SETUP] # [DPOF SET] #
[CANCEL ALL] and press the cursor button.
≥ When the confirmation message appears,
select [YES], then press the cursor button.
≥ The DPOF setting can be established for up to
999 prints.
≥ DPOF setting made on other devices may not
be recognised by this unit. Please perform the
DPOF settings on this unit.
≥ You cannot add the recording date to pictures
to be printed with the DPOF settings.
DPOF setting
This is for writing the printing data on
an SD card.
HDCSD5-VQT1H64_eng.book 75 ページ ２００７年８月１日 水曜日 午後７時１６分
To Next Page
Loading...
