Panasonic HDC-SD5 - Contrast and Fade Effects; Intelligent Contrast Control Usage; Fade In;Fade Out Effect Application

50
VQT1H64
Recording
This brightens parts that are in the shadow and
difficult to see and suppresses white saturation in
bright parts.
¬Rotate the mode dial to select .
1 Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2 Move the cursor button up to
select [ ].
To cancel Intelligent contrast control
Select [ ] again.
≥ If there are extremely dark or bright parts or the
brightness is insufficient, the effect may not be
clear.
≥ If you turn off the power or operate the mode
dial, the intelligent contrast control is cancelled.
Fade in:
The image and audio gradually appear.
Fade out:
The image and audio gradually disappear.
¬Rotate the mode dial to select .
1 Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2 Move the cursor button left to
select [ ].
3 Press the recording start/stop
button.
Start recording. (Fade in)
When you start recording, the image/audio
gradually appears.
Intelligent contrast control
This is for recording both bright and
dark parts clearly at the same time.
Fade in/fade out function
HDCSD5-VQT1H64_eng.book 50 ページ ２００７年８月１日 水曜日 午後７時１６分