79
VQT1H64
With other products
ª About the settings when 
connecting with HDMI
When this unit is connected to another device 
with a HDMI cable, the output setting on this unit 
can be changed.
HDMI output resolution
You can switch the method to output the images.
Press the MENU button, then select 
[SETUP] # [HDMI RESOLUTION] # 
desired item and press the cursor 
button.
[AUTO]: The output resolution is 
automatically set based on the 
information from the connected TV.
[1080i]: The interlace method with 1080 
available scan lines is used for 
output.
[576p]: The progressive method with 576 
available scan lines is used for 
output.
≥ If the images are not output on the TV when 
the setting is [AUTO], switch to the method 
[1080i] or [576p] which enables the images to 
be displayed on your TV. (Please read the 
operating instructions for the TV.)
≥ Be sure to connect to an HDMI input terminal. 
Do not connect to an HDMI output terminal on 
other products.
Information from the 
connected TV
Output resolution
720p, 1080i 1080i
Others 576p
1080i
This is an interlace scan method which scans 
1080 scan lines to display a high definition 
image. The 1080 available scan lines are 
divided in half and scanned on the screen 
alternatively every 1/50
th
 of a second. The 
number of available scan lines is nearly 
double the 576 scan lines used to display 
standard images until now so the images have 
clearer detail and a lot of presence.
576p
This is a progressive scan method which 
scans all 576 available scan lines on the 
screen at the same time every 1/50
th
 of a 
second. This method reduces the flickering as 
the scan lines are not scanned on the screen 
alternatively like in the interlace method.
576i
This is an interlace scan method in which the 
576 available scan lines are divided in half 
and scanned on the screen alternatively every 
1/50
th
 of a second.
Interlace method/progressive method
Video signals until now (PAL) are referred to 
as 576i (i is short for interlace) whereas a 
high-density video signal that doubles the 
number of scan lines is called 576p (p is short 
for progressive).
The component terminal and the HDMI 
terminal on this unit are also compatible with 
high definition image output 1080i. It is 
necessary to have a compatible TV to enjoy 
progressive and high definition images.
HDCSD5-VQT1H64_eng.book  79 ページ  2007年8月1日 水曜日 午後7時16分