49
VQT1H64
Recording
≥ If the zoom lever is pushed to the end, you can
zoom from 1k up to 10k in as fast as approx.
2.5 seconds.
≥ When the zoom speed is high, the subject may
not be focused easily.
If the zoom magnification exceeds 10k, then the
digital zoom function will be activated. The
maximum magnification provided by the digital
zoom can be switched.
¬Rotate the mode dial to select .
Press the MENU button, then select
[BASIC] # [D.ZOOM] # desired
item and press the cursor button.
[OFF]: Optical zoom only (Up to 10k)
[25k]: Up to 25k
[700k]: Up to 700k
≥ If [25k] or [700k] is selected, the digital zoom
range is displayed in blue while zooming.
≥ The larger the digital zoom magnification, the
more the image quality is degraded.
The zoom microphone is linked to the zooming
operation so that far-away sounds with a
tele-shot and close-up sounds with a wide-angle
shot are recorded more clearly.
¬Rotate the mode dial to select .
Press the MENU button, then select
[VIDEO] # [ZOOM MIC] # [ON] and
press the cursor button.
≥ The stereo effect will be reduced with
tele-shots.
You can record yourself while viewing the LCD
monitor.
¬Rotate the mode dial to select .
Rotate the LCD monitor towards the
lens side.
The image is horizontally flipped as if you see a
mirror image. (However the image recorded is
the same as a normal recording.)
≥ When the LCD monitor is rotated towards the
lens side, the icon will not be displayed even if
you press the cursor button.
≥ Only some indications will appear on the
screen. When [°] appears, return the
direction of the LCD monitor to normal position
and check the warning/alarm indication.
(l 114)
Digital zoom function
About using the zoom
microphone function
Recording yourself
HDCSD5-VQT1H64_eng.book 49 ページ ２００７年８月１日 水曜日 午後７時１６分
To Next Page
Loading...
