EasyManua.ls Logo

Panasonic HDC-SD5 - Playing Back Discs from DVD Burner; Connecting Unit for Disc Playback; Disc Playback Operation Steps

Panasonic HDC-SD5
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
With other products
89
VQT1H64
You can play back the motion pictures copied to a disc.
¬Connect the AC adaptor supplied with the DVD burner to the DVD burner. (You
cannot supply power to the DVD burner from this unit.)
Please read the operating instructions of the DVD burner for how to use it.
1 Connect this unit to the AC adaptor.
If a battery is used, operation is not possible when this unit is connected to a DVD burner.
2 Set the mode dial to to turn on the power.
3 Connect this unit and the DVD burner.
A Mini AB USB Connection Cable (supplied with the DVD burner)
B DVD burner (optional)
Connect the MiniA terminal to this unit and the MiniB terminal to the DVD burner.
Insert the plugs as far as they will go.
[ ] (disc playback) tab C appears.
If [ ] (disc playback) tab does not appear even when the DVD burner is connected, disconnect and
then reconnect the Mini AB USB Connection Cable.
4 Insert the copied disc in the DVD burner.
The motion pictures on the disc are displayed as thumbnails.
5 Use the cursor button to select the scene to be
played back and then play it back.
The playback operation is performed the same as when playing back
motion pictures on an SD card. (l 64)
After playback, eject the disc and disconnect the Mini AB USB Connection Cable from this unit.
It is only possible to play back discs recorded in AVCHD. It may not be possible to play back
discs recorded on other devices.
Playing back a disc inserted in the DVD burner
Mini A
Mini B
A
B
C
HDCSD5-VQT1H64_eng.book 89 ペー 007年8月1日 水曜日 午後7時16分

Table of Contents

Other manuals for Panasonic HDC-SD5

Related product manuals