92
VQT1H64
With other products
4 Start playback on this unit. Then
start recording on the connected
device.
≥ See the operating instructions of the video
device for details.
To stop dubbing
1) Stop recording on the connected device.
2) Then stop playback on this unit.
≥ If the date and time display and function
indication are unnecessary, cancel them
before dubbing. (l 37, 77)
With a printer (PictBridge)
To print pictures by directly connecting this unit to
the printer, use a printer compatible with
PictBridge. (Read the operating instructions for
the printer.)
≥ Use the AC adaptor to free you from worrying
about the battery running down.
¬Insert an SD card with recorded
images in this unit, then turn on the
unit.
1 Connect this unit and a printer.
A USB cable (supplied)
The USB function selection screen will appear.
≥ Insert the plugs as far as they will go.
≥ Do not use any other USB connection cables
except the supplied one. (Operation is not
guaranteed with any other USB cables.)
2 Select [PictBridge] and press the
cursor button.
The [PictBridge] indication appears on this unit’s
screen.
≥ If the [PictBridge] indication does not appear or
continues to flash, disconnect and then
reconnect the USB cable or check the printer,
SD card and settings on this unit.
3 Select a file to be printed, then
press the cursor button.
The number of pictures set is displayed.
If the dubbed images are played back on a
wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction
of the device you are connecting to or read the
operating instructions of the wide-screen TV
and set the aspect ratio to 16:9.
A
HDCSD5-VQT1H64_eng.book 92 ページ ２００７年８月１日 水曜日 午後７時１６分
To Next Page
Loading...
