3-100 Telephone Features
P 3.2 Telephone Features
Conditions
• An account code must be stored by pressing “” and entering the account code after
the line access code in the account code verify-all and forced modes.
• You can store an extension number, telephone number, or feature number of up to
twenty-four digits. Valid digits are “0 through 9”.
• A pause can be stored by pressing the key. However, in the account code verify-all,
verify-toll and forced modes, “” is not regarded as a pause.
• To store the telephone number of an external party, a line access code (9 or 81 through
83) must be stored as the first digit.
• A rotary telephone cannot use this feature.
Programming Reference
• Station Programming (Section 2)
Flexible Button Assignment — One-Touch Dialing Button
SLT
To Next Page
Loading...
