PT Overview 1-7
1.1 Configuration
Usage
AUTO ANSWER/MUTE Button (KX-TA30820/KX-TA30830)
Used for answering an extension automatically, or turns the microphone off during a
conversation.
AUTO DIAL/STORE Button
Used for System Speed Dialing or storing program changes.
CONF (Conference) Button
Used to establish a three-party conference.
FLASH/RECALL Button
Sends an External Feature Access signal to the central office or host PBX to access their
system features. If a PBX is not being used, this button can be used to disconnect the
current call and start another call without hanging up.
FWD/DND (Call Forwarding/Do Not Disturb) Button
Used to program the Call Forwarding feature or set the Do Not Disturb (DND) feature.
HOLD Button
Used to place a call on hold.
INTERCOM Button
Used to make or receive intercom calls.
MESSAGE Button
Used to call back the party who left a message waiting indication at your extension. The
Message/Ringer Lamp lights when a message waiting indication is left at your extension.
MONITOR Button (KX-TA30850)
Used for a hands-free dialing operation.
PAUSE Button
Inserts a pause in speed dial numbers or in other numbers.
PROGRAM Button
Used to enter and exit the Programming mode.
REDIAL Button
Used for Last Number Redialing.
To Next Page
Loading...
