Panasonic KX-TA308 - Page 32

2-4 Station Programming (Personal Programming)
2.1 Station Programming Instructions
To confirm the assigned data on the Flexible button
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button.
— The following outline contains the buttons and program access numbers used for Station
Programming. Detailed operating instructions are explained in this section.
— To exit the Station Programming mode, press the PROGRAM button.
— If you wish to change the data, follow the programming procedure explained in this
section.
To clear the data on the Flexible button
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press HOLD.
Press the desired Flexible button.
HOLD
• The display shows the initial programming mode.• The display shows the current status.
PT
Press the desired
Flexible button that
you wish to clear.
Dial 2.
Press STORE.
AUTO DIAL
STORE
• The STORE indicator lights.
• The display shows the initial programming mode.