Panasonic KX-TDA100

2.8 [1] Configuration
134 PC Programming Manual
Programming Manual References
None
Feature Guide References
None
Status
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
Value Range
INS: The Cell Station (CS) is in service.
OUS: The CS is out of service.
Fault: The port is not communicating with the CS.
Maintenance Console Location
2.8.8 [1-1] Slot—Port Property - CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.8.9 [1-1] Slot—Port Property - CSI/F Port—Connection Command (KX-TDA100/KX-TDA200/KX-
TDA600 only)
Feature Guide References
None
CS Name
Specifies the name of the CSIF port.
Value Range
Max. 20 characters
Maintenance Console Location
2.8.8 [1-1] Slot—Port Property - CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None