Panasonic KX-TDA100 Pc Programming Manual

2.11 [4] Extension
PC Programming Manual 611
2.11.8 [4-1-6] Wired Extension—NDSS Link Data - Send
It is possible to cancel the transmission of an extension's status data over the network. Select the
desired extension from the Extension Number / Name list.
Network BLF Data to NDSS Key of Other PBX - Other PBX (Network PBX
ID=1)
Selects whether extension status data is transmitted over the network for the selected extension. This
setting is automatically set to ON when the feature is used, and can only be manually changed from
ON to OFF, to cancel data transmission.
Value Range
OFF, ON
Maintenance Console Location
2.11.8 [4-1-6] Wired Extension—NDSS Link Data - Send
Programming Manual References
2.16.1 [9-1] TIE Table
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)

Panasonic KX-TDA100 Specifications

General

System Capacity	Up to 128 extensions
VoIP Support	Yes, with optional cards
Digital Extensions	Yes
Analog Extensions	Yes
ISDN Support	Yes
Power Supply	AC 100-240 V, 50/60 Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Networking	Yes
Type	Hybrid IP PBX
Wireless Capability	Yes
Supported Extensions	Digital, Analog
Trunk Interfaces	Analog, ISDN
Voicemail Capacity	Optional, via voice processing cards