Panasonic KX-TDA100

2.8 [1] Configuration
256 PC Programming Manual
2.8.24 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 2
Group-A Code Assignment—Address Complete
Specifies the address complete (completion of dial reception) code sent to the telephone company.
Value Range
1–15
Maintenance Console Location
2.8.24 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 2
Programming Manual References
None
Feature Guide References
None
Group-A Code Assignment—ANI Request
Specifies the code used to request the telephone company to send an ANI number.
Value Range
1–15
Maintenance Console Location
2.8.24 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 2
Programming Manual References
None
Feature Guide References
None
Group-A Code Assignment—ANI (N+1)
Specifies the code used to request the telephone company to send the (N+1)th digit of an ANI
number.
Value Range
1–15
Maintenance Console Location
2.8.24 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 2
Programming Manual References
None