Panasonic KX-TDA100

2.9 [2] System
428 PC Programming Manual
2.9.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
Different ring tone patterns can be selected for incoming doorphone calls depending on the
doorphone port that the calls originate from. A maximum of 8 Ring Tone Pattern Tables can be
programmed, and any pattern table can be selected for use by an extension.
Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming doorphone calls.
Value Range
Single, Double, Triple, S-Double, Option 1, Option 2
Maintenance Console Location
2.9.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
Programming Manual References
2.11.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.11.10 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
2.12.1 [5-1] Doorphone
Feature Guide References
1.1.3.2 Ring Tone Pattern Selection
1.17.1 Doorphone Call