Panasonic KX-TDA100

2.8 [1] Configuration
272 PC Programming Manual
2.8.26 [1-1] Slot—Port Property - E1 Port—Connection Command
Commands for the E1 channels can be programmed.
INS
Puts the channel in service.
Value Range
Not applicable.
Maintenance Console Location
2.8.26 [1-1] Slot—Port Property - E1 Port—Connection Command
Programming Manual References
2.8.25 [1-1] Slot—Port Property - E1 Port
Feature Guide References
None
OUS
Takes the channel out of service. This enables a temporary non-use of the channel, for example, for
the purpose of repair.
Value Range
Not applicable.
Maintenance Console Location
2.8.26 [1-1] Slot—Port Property - E1 Port—Connection Command
Programming Manual References
2.8.25 [1-1] Slot—Port Property - E1 Port
Feature Guide References
None