Panasonic KX-TDA100

2.2 Start Menu
42 PC Programming Manual
2.2.5 Start Menu—Connect—LAN
Connects to the PBX in Interactive mode through the Local Area Network interface of the PBX.
A CTI-LINK card (KX-TDA100/KX-TDA200/KX-TDA600) or IP-GW4 card (KX-TDA30) must be
installed and the IP address of the PBX set to use this feature. For more details, see 2.8.44 [1-1]
Slot—Card Property - CTILINK (KX-TDA100/KX-TDA200/KX-TDA600 only) and 2.8.33 [1-1]
Slot—Card Property - IP Gateway (KX-TDA30 only).
This option allows direct entry of connection parameters, for cases where the PC is used to connect
to one or just a few PBXs, and an individual profile for each PBX is not necessary. If you connect to
multiple PBXs and would prefer to choose from among pre-saved profiles instead, see 2.2.8 Start
Menu—Connect—Profile Setup for more details about creating profiles.
To connect to the PBX by LAN
1.
From the start menu, select Connect.
The Login window will be displayed.
2. Select a connection option.
• Select a Profile Name if you want to use a pre-saved profile.
a. Select the profile to use from the drop-down list.
b. If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be
entered.
• To enter the parameters manually, select the PBX Model and confirm that the LAN radio
button is selected.
a. Specify the connection parameters as required. For more details, see the table below.
b. Enter the system password for the PBX.
3. Click Connect.
Connection Settings for LAN
Setting Values Explanation
IP Address 1.0.0.0–
223.255.255.255
Specify the IP address of the PBX on the LAN.
Enter the same IP address that was input in IP
Address of 2.8.44 [1-1] Slot—Card Property
- CTILINK (KX-TDA100/KX-TDA200/KX-
TDA600 only).
Port Number 1–65535 Specify the port number used to access the
PBX via LAN. Enter the same port number that
was input in Maintenance Port Number of
2.8.44 [1-1] Slot—Card Property - CTILINK
(KX-TDA100/KX-TDA200/KX-TDA600 only)
or 2.8.33 [1-1] Slot—Card Property - IP
Gateway (KX-TDA30 only).