2.13 [6] Feature
PC Programming Manual 725
2.13.4 [6-4] Second Dial Tone
A programmed Pause time can be inserted automatically between the Second Dial Tone Waiting
code and the following digits. When a programmed Second Dial Tone Waiting code is dialled after
seizing a trunk, a preprogrammed number of pauses are inserted after the code.
A maximum of 100 Second Dial Tone Waiting codes can be programmed. 20 codes are displayed at
a time. To display other sets of codes, click the applicable tab.
Second Dial Tone Waiting Code
Specifies the Second Dial Tone Waiting code.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.13.4 [6-4] Second Dial Tone
Programming Manual References
None
Feature Guide References
1.5.4.7 Pause Insertion
Pause Repeating Counter
Specifies the number of pauses to be inserted when waiting for the second dial tone.
Value Range
0–20
Maintenance Console Location
2.13.4 [6-4] Second Dial Tone
Programming Manual References
None
Feature Guide References
1.5.4.7 Pause Insertion
To Next Page
Loading...
