Panasonic KX-TDA100 Pc Programming Manual

2.8 [1] Configuration
306 PC Programming Manual
2.8.35 [1-1] Slot—Port Property - IP-GW Port—Connection
Command
Commands for the IP-GW ports can be programmed.
INS
Puts the port in service.
Value Range
Not applicable.
Maintenance Console Location
2.8.35 [1-1] Slot—Port Property - IP-GW Port—Connection Command
Programming Manual References
2.8.34 [1-1] Slot—Port Property - IP-GW Port
Feature Guide References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Value Range
Not applicable.
Maintenance Console Location
2.8.35 [1-1] Slot—Port Property - IP-GW Port—Connection Command
Programming Manual References
2.8.34 [1-1] Slot—Port Property - IP-GW Port
Feature Guide References
None

Panasonic KX-TDA100 Specifications

General

System Capacity	Up to 128 extensions
VoIP Support	Yes, with optional cards
Digital Extensions	Yes
Analog Extensions	Yes
ISDN Support	Yes
Power Supply	AC 100-240 V, 50/60 Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Networking	Yes
Type	Hybrid IP PBX
Wireless Capability	Yes
Supported Extensions	Digital, Analog
Trunk Interfaces	Analog, ISDN
Voicemail Capacity	Optional, via voice processing cards