Panasonic KX-TDA100

2.8 [1] Configuration
PC Programming Manual 333
2.8.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)
The status of the DPH ports can be viewed, and set to INS (in service) or OUS (out of service).
Slot
Indicates the slot position (reference only).
Value Range
Slot number
Maintenance Console Location
2.8.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)
Programming Manual References
None
Feature Guide References
None
Port Number
Indicates the port number (reference only).
Value Range
Port number
Maintenance Console Location
2.8.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)
Programming Manual References
None
Feature Guide References
None
Port Status
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.