Panasonic KX-TDA100

2.2 Start Menu
PC Programming Manual 41
2.2.4 Start Menu—Connect—USB
Connects to the PBX in Interactive mode through the USB port on the PBX, or a USB port (USB
Module) attached to a DPT.
To connect to the PBX by USB
1.
From the start menu, select Connect.
The Login window will be displayed.
2. Select a connection option.
• Select a Profile Name if you want to use a pre-saved profile.
a. Select the profile to use from the drop-down list.
b. If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be
entered.
• To enter the parameters manually, select the PBX Model and confirm that the USB radio
button is selected.
a. Enter the system password for the PBX.
3. Click Connect.