Panasonic KX-TDA100

2.8 [1] Configuration
144 PC Programming Manual
Value Range
None, *, #, A, B, C, D
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Caller ID—Caller ID (DTMF) Information Start Code
Selects the DTMF code used to detect the beginning of the information segment of a Caller ID series.
Value Range
None, *, #, A, B, C, D
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Caller ID—Caller ID (DTMF) End Code
Selects the DTMF code used to detect the end of a Caller ID series.
Value Range
None, *, #, A, B, C, D
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Caller ID—Caller ID (DTMF) Information Code-PRIVATE, OUT OF AREA,
TECHNICAL REASON, UNKNOWN NUMBER, RESTRICTED NUMBER
Specifies the number used to identify each type of information code.