Panasonic KX-TDA100

2.8 [1] Configuration
PC Programming Manual 147
Pay Tone—Pay Tone Pulse - Interval (KX-TDA100/KX-TDA200/KX-TDA600
only)
Specifies the maximum length of time between pay tone signals.
Value Range
8 × n (n=1–250) ms
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
1.26.3 Call Charge Services
Pay Tone—Sending Flash while end talk (KX-TDA100/KX-TDA200/KX-
TDA600 only)
Enables the PBX to send a flash signal at the end of call to demand a pay tone signal.
Value Range
Disable, Enable
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Guide References
1.26.3 Call Charge Services