Panasonic KX-TDA100

2.8 [1] Configuration
240 PC Programming Manual
Value Range
8 × n (n=3–63) ms
Maintenance Console Location
2.8.21 [1-1] Slot—Card Property - E1 type
Programming Manual References
None
Feature Guide References
None
Flash—Flash Width
Specifies the maximum length of a flash signal sent from an E1 line that the PBX can recognise as a
hookswitch flash signal.
Value Range
8 × n (n=3–191) ms
Maintenance Console Location
2.8.21 [1-1] Slot—Card Property - E1 type
Programming Manual References
None
Feature Guide References
None
Caller ID—Caller ID Start Code
Selects the DTMF code used to detect the beginning of a Caller ID series.
Value Range
*, #, A–D
Maintenance Console Location
2.8.21 [1-1] Slot—Card Property - E1 type
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Caller ID—Caller ID Information End Code
Selects the delimiter used to separate multiple parameters in a Caller ID series.