Panasonic KX-TDA100

2.8 [1] Configuration
252 PC Programming Manual
Maintenance Console Location
2.8.23 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 1
Programming Manual References
None
Feature Guide References
None
Group-l Code Assignment—ANI Complete (1)–(4)
Specifies the code used to indicate the end of an ANI number.
Value Range
ANI Complete (1): 1–15
ANI Complete (2)–(4): Undefined, 1–15
Maintenance Console Location
2.8.23 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 1
Programming Manual References
None
Feature Guide References
None
Group-l Code Assignment—ANI Reject
Specifies the code used to reject an ANI number.
Value Range
1–15
Maintenance Console Location
2.8.23 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 1
Programming Manual References
None
Feature Guide References
None
Group-l Code Assignment—End of Digit
Specifies the code used to recognise the end of each digit in an ANI number.
Value Range
Undefined, 1–15