Panasonic KX-TDA100

2.8 [1] Configuration
PC Programming Manual 259
Feature Guide References
None
Group-A Code Assignment—(N-3) Request
Specifies the code used to request the telephone company to send the (N-3)th digit of an ANI number.
Value Range
Undefined, 1–15
Maintenance Console Location
2.8.24 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 2
Programming Manual References
None
Feature Guide References
None
Group-B Code Assignment—Idle (1)
Specifies the code used normally to inform the telephone company that the status of the called
destination is idle.
Value Range
Undefined, 1–15
Maintenance Console Location
2.8.24 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 2
Programming Manual References
None
Feature Guide References
None
Group-B Code Assignment—Idle (2)
Specifies the code used in special circumstances, such as an international call, to inform the
telephone company that the status of the called destination is idle.
Value Range
Undefined, 1–15
Maintenance Console Location
2.8.24 [1-1] Slot—Card Property - E1 type—MFC-R2 Setting 2