Panasonic KX-TDA100

2.8 [1] Configuration
274 PC Programming Manual
Maintenance Console Location
2.8.27 [1-1] Slot—Card Property - EM type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
Inter-digit Timer
Specifies the pseudo-answer time.
Value Range
3–15 s
Maintenance Console Location
2.8.27 [1-1] Slot—Card Property - EM type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
DTMF Tone—DTMF Inter-digit Pause
Specifies the length of the DTMF inter-digit pause. This allows the telephone company to have
enough time to accept the dialled digits correctly.
Value Range
64 + 16 × n (n=0–11) ms
Maintenance Console Location
2.8.27 [1-1] Slot—Card Property - EM type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
Pulse Dial—Pulse % Break
Specifies the % break for pulse digits. This is the ratio between the break (on-hook) signal and make
(off-hook) signal in a pulse dial.