Panasonic KX-TDA100 - Page 285

2.8 [1] Configuration
PC Programming Manual 285
Feature Guide References
None
E&M TIE Line Type
Selects the type of the voice path for an E & M line.
Value Range
2 wires, 4 wires
Maintenance Console Location
2.8.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
Sending Caller ID to TIE
Specifies whether Caller ID information is sent when Trunk Property on this screen is set to Private.
Value Range
No, Yes
Maintenance Console Location
2.8.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
Receiving Caller ID from TIE
Specifies whether Caller ID information is received when Trunk Property on this screen is set to
Private.
Value Range
No, Yes
Maintenance Console Location
2.8.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None