Panasonic KX-TDA100

2.8 [1] Configuration
PC Programming Manual 291
Value Range
No, Yes
Maintenance Console Location
2.8.30 [1-1] Slot—Card Property - DID type
Programming Manual References
None
Feature Guide References
None
Pulse Dial—Pulse Maximum BREAK Width
Specifies the maximum length of the break signal in a pulse dial.
Value Range
8 × n (n=9–20) ms
Maintenance Console Location
2.8.30 [1-1] Slot—Card Property - DID type
Programming Manual References
None
Feature Guide References
None
Pulse Dial—Pulse Minimum MAKE Width
Specifies the minimum length of the make signal in a pulse dial.
Value Range
8 × n (n=1–5) ms
Maintenance Console Location
2.8.30 [1-1] Slot—Card Property - DID type
Programming Manual References
None
Feature Guide References
None
Line Signal Setting—Wink Signal Width
Specifies the length of a wink signal.