Panasonic KX-TDA100

2.8 [1] Configuration
PC Programming Manual 321
Fault: The port is not communicating with the network.
Maintenance Console Location
2.8.40 [1-1] Slot—Port Property - SIP-GW Port (KX-TDA30 only)
Programming Manual References
None
Feature Guide References
None
Subscriber Number
Specifies the number used as the CLIP number.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.40 [1-1] Slot—Port Property - SIP-GW Port (KX-TDA30 only)
Programming Manual References
None
Feature Guide References
None
CLIR
Specifies whether to restrict the display of the CLIP number on the called party's telephone when
making a public network trunk call.
Value Range
Ye s, N o
Maintenance Console Location
2.8.40 [1-1] Slot—Port Property - SIP-GW Port (KX-TDA30 only)
Programming Manual References
None
Feature Guide References
None