Panasonic KX-TDA100

2.9 [2] System
PC Programming Manual 359
DISA—CO-to-CO Call Prolong Counter
Specifies the number of times that the caller can prolong a trunk-to-trunk call on a DISA line.
(Selecting "0" enables the caller to prolong the trunk-to-trunk call without restriction.)
Value Range
0–15
Maintenance Console Location
2.9.4 [2-3] Timers & Counters
Programming Manual References
2.12.4 [5-3-2] Voice Message—DISA Message
Feature Guide References
1.17.6 Direct Inward System Access (DISA)
DISA—CO-to-CO Call Prolong Time
Specifies the length of time that a trunk-to-trunk call on a DISA line is prolonged each time that the
caller prolongs the call. (Selecting "0" prevents the caller from prolonging the trunk-to-trunk call.)
Value Range
0–7 min
Maintenance Console Location
2.9.4 [2-3] Timers & Counters
Programming Manual References
2.12.4 [5-3-2] Voice Message—DISA Message
Feature Guide References
1.17.6 Direct Inward System Access (DISA)
DISA—Progress Tone Continuation Time before Recording Message
Specifies the length of time that a progress tone is sent to the manager extension before recording
an OGM.
Value Range
0–7 s
Maintenance Console Location
2.9.4 [2-3] Timers & Counters
Programming Manual References
2.12.4 [5-3-2] Voice Message—DISA Message