Panasonic KX-TDA100

2.9 [2] System
PC Programming Manual 367
During Conversation—DTMF Inter-digit Pause
Specifies the length of time between DTMF signals when numbers are dialled in succession from a
PT or PS during a conversation.
Value Range
64 + 16 × n (n=0–15) ms
Maintenance Console Location
2.9.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Guide References
None
During Conversation—Pause Signal Time
Specifies the length of the pause inserted when the PAUSE button is pressed during a conversation.
Value Range
1.5 s, 2.5 s, 3.5 s, 4.5 s
Maintenance Console Location
2.9.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Guide References
1.5.4.7 Pause Insertion
System Wireless—PS Out of Range Timer
When the destination of an incoming call is a PS, specifies the length of time the PBX searches for
the PS before setting its status to Out of Range.
If "0" is assigned, the timer is controlled by the cell station.
Value Range
0 s, 4 s, 8 s
Maintenance Console Location
2.9.4 [2-3] Timers & Counters
Programming Manual References
2.9.17 [2-9] System Options—System Wireless—Out of Range Registration