Panasonic KX-TDA100

2.9 [2] System
452 PC Programming Manual
Feature Guide References
1.1.3.3 Call Waiting
Busy Out—Busy Out for Analogue CO
Enables the PBX to automatically set a trunk to Busy Out status when a loop current is not detected,
preventing that trunk from being used.
Value Range
Disable, Enable
Maintenance Console Location
2.9.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.5.4.6 Trunk Busy Out
ISDN Voice Path Connection—Connect when "Alert" is sent from ISDN
Enables the voice path of an ISDN line to connect even when an "Alert" signal is received from the
telephone company.
Value Range
Disable, Enable
Maintenance Console Location
2.9.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
None
PT Feature Access—No. 1–8
Specifies the System Feature Access Menu (1–8) shown on the display of an extension.
Value Range
None, Call Back Cancel, Call Pickup Direct, Call Pickup Group, Doorphone Call, Door Open, Relay
ON, External BGM, Paging
Maintenance Console Location
2.9.17 [2-9] System Options