Panasonic KX-TDA100

2.10 [3] Group
522 PC Programming Manual
VM DTMF Status Signal—FWD to VM Busy Tone
Specifies the DTMF status signal the PBX sends to the VPS when the call has been forwarded to the
VPS and all ports of the VPS are busy.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
2.10.22 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Guide References
None
VM DTMF Status Signal—FWD to Extension Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the call has been forwarded to
another extension and the PBX is calling the destination extension.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
2.10.22 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Guide References
None
VM DTMF Command—Recording Message
Specifies the DTMF command the PBX sends to the VPS when a call is forwarded, intercepted, or
transferred to the VPS, so that the caller can leave a message in a certain mailbox.
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
2.10.22 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None