Panasonic KX-TDA100

2.5 Tool
60 PC Programming Manual
Related programming: 2.11.10 [4-2-1] Portable Station—Extension Settings
Related programming: 2.9.9 [2-6-2] Numbering Plan—Quick Dial
Related programming: 2.9.9 [2-6-2] Numbering Plan—Quick Dial
To import system data
1.
From the Tool menu, point to Import, and then click the type of data to import.
2. Navigate to the folder containing the system data file you want to open.
3. Select the file.
4. Click Open to open the file.
If applicable, a list of field names found in the imported file will be displayed.
5. For the Feature - Speed Dial and Caller ID table, when an EMEC (KX-TDA600) or MEC (KX-
TDA30/KX-TDA100/KX-TDA200) card is installed, select the Speed Dial table to which to import
the data (KX-TDA30: Basic Memory or Expanded Memory; KX-TDA100/KX-TDA200/KX-
TDA600: system or tenant) from the drop-down list.
6. If required, select import fields.
When import fields can be selected, the selection screen is displayed automatically. Matching
origin and destination fields are entered by default.
• To change the destination for an import field, select the preferred field from the drop-
down list.
• To not import a field, select the blank option from the drop-down list.
7. Click OK to perform the import operation.
Depending on the type of data imported, the relevant programming screen may be displayed.
•Click OK or Apply to complete the import operation.
Extension Name Extension Name (selected
automatically)
Quick Dial (Basic)
Data Type Import Destination
No. Location
Dial Dial
Phone Number Phone Number
Quick Dial (MEC)
Data Type Import Destination
No. Location
Dial Dial
Phone Number Phone Number
PS Extension
Data Type Import Destination