2.17 [10] CO & Incoming Call
768 PC Programming Manual
Feature Guide References
1.1.1.1 Incoming Trunk Call Features—SUMMARY
1.30.1 TIE Line Service
1.30.3 Virtual Private Network (VPN)
Distribution Method
Selects the distribution method for incoming trunk calls. The value range of this setting depends on
the card type and Trunk Property assigned for each trunk.
Value Range
DIL: Distribution depends on the trunk through which the calls arrive
DDI/DID: Distribution depends on the DDI/DID number of the calls
MSN: Distribution depends on the MSN of the calls
Maintenance Console Location
2.17.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
1.1.1.1 Incoming Trunk Call Features—SUMMARY
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
DDI/DID/TIE/MSN—Remove Digit
Specifies the number of leading digits to be removed from the incoming called number for DDI/DID
distribution or for TIE line service.
Value Range
0–15
Maintenance Console Location
2.17.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
1.30.1 TIE Line Service
To Next Page
Loading...
