Panasonic KX-TDA100D

2.2.9 Fastening Amphenol Connector
An Amphenol 57JE
-type connector is used on some of the optional service cards.
To connect an Amphenol connector, use the spring latch or screw to fix the upper part and use Velcro® tape
to fix the lower part of the connector.
Type A (Spring Latch + Velcro Tap e)
Type B (Screw + Velcro Tap e)
Velcro
Tape
Velcro
Tape
2
1
2
2
1
Spring
Latch
1
Spring
Latch
Remove the
screw on the
optional service
card.
Insert the screw (included
with the Amphenol or
optional service card).
Installation Manual 51
2.2.9 Fastening Amphenol Connector