Panasonic KX-TDA100D

2.4.7 T1 Card (KX-TDA0187)
Function
1-port T1 trunk card. EIA/TIA standard compliant.
LEDs
RJ45
To NT1 / Extension
AB
Accessories and User-supplied Items
Accessories (included): Ferrite core ´ 1
User-supplied (not included): RJ45 connector
CAUTION
• When connecting this optional service card to the trunk, connect through NT1; do not connect to the
trunk directly.
• T1 ports are SELV ports and should only be connected to SELV services.
Notice
When
connecting the RJ45 connector, attach the included ferrite core. Refer to "2.2.8 Attaching a Ferrite
Core".
Note
• This optional service card can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.
• To confirm the trunk connection, refer to "Confirming the Trunk Connection
" in "2.11.1 Starting the
PBX".
Switch Settings
Switch Type Usage and Status Definition
A/B Slide Select A (default) for trunk or B for extension use.
70 Installation Manual
2.4.7 T1 Card (KX-TDA0187)