2.7 [1] Configuration
108 PC Programming Manual
Value Range
3–6 s
Maintenance Console Location
2.7.10 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
None
First Dial Timer (CO)
Specifies the minimum time that the PBX waits after seizing a CO line, before sending the dialed digits
to the telephone company. This allows the telephone company to have enough time to accept the
dialed digits correctly.
Default
1.0 s
Value Range
0.5 × n (n=1–16) s
Maintenance Console Location
2.7.10 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
None
CO Feed Back Tone
Specifies whether the pulse feedback tone is turned on or not. For outgoing CO line calls, audible
tones can be heard as the dialed number is sent out, which informs the extension user that the
number has been dialed.
Default
Ye s
Value Range
No, Yes
Maintenance Console Location
2.7.10 [1-1] Slot—LCO Card Property
To Next Page
Loading...
