Panasonic KX-TDA50

2.16 [10] CO & Incoming Call
PC Programming Manual 657
2.16.5 [10-3] DID Table—Name Generate (KX-TDA100/KX-
TDA200/KX-TDA600 only)
Name Generate allows DID names to be programmed at once for a set of locations in series.
If a name generated here is longer than 20 characters, the additional characters will be discarded.
Beginning Entry Location
Specifies the number of the first location to be programmed.
Default
1
Value Range
1–1000
Maintenance Console Location
2.16.5 [10-3] DID Table—Name Generate (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
1.4.5 DID (Direct Inward Dialing)
Number to Generate
Specifies the number of locations to be programmed.
Default
Not stored.
Value Range
1–1000
Maintenance Console Location
2.16.5 [10-3] DID Table—Name Generate (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
1.4.5 DID (Direct Inward Dialing)