Panasonic KX-TDA50

2.9 [3] Group
346 PC Programming Manual
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings
2.16.1 [10-1] CO Line Settings
Feature Manual References
1.13.13 PRIVATE NETWORK FEATURES
Line Hunting Order
Specifies the CO line hunting sequence for the trunk group. The hunting sequence can be
programmed to start from the lowest or highest numbered CO lines, or to rotate uniformly among all
CO lines.
Default
High -> Low
Value Range
High -> Low, Low -> High, Rotation
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
2.16.1 [10-1] CO Line Settings
Feature Manual References
1.3.14 CO Line Access
CO-CO Duration Time
Specifies the length of time that a CO-to-CO line call can be maintained before being disconnected.
Default
10 min
Value Range
None, 1–60 min
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
2.16.1 [10-1] CO Line Settings
Feature Manual References
1.3.15 CO Line Call Limitation