2.8 [2] System
296 PC Programming Manual
Programming Manual References
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.10 [4-2-1] Portable Station—Extension Settings—Main—COS
Feature Manual References
1.6.6 FWD (Call Forwarding)
Programming Mode Level
Specifies the level of authorization for performing PT programming.
Default
PROG Only
Value Range
Disable: A PT user cannot perform any programming.
PROG Only: A PT user can perform only personal programming.
PROG and PROG **/*#: A PT user can perform both personal and system programming.
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.10 [4-2-1] Portable Station—Extension Settings—Main—COS
Feature Manual References
1.13.28 PT Programming
Manager
Specifies the authorization to use manager features.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.10 [4-2-1] Portable Station—Extension Settings—Main—COS
To Next Page
Loading...
