2.5 Utility
66 PC Programming Manual
A message box will be displayed.
5. Click OK.
To turn this utility off:
1.
From the Utility menu, select Timed Update.
2. Select the Off (Cancel) option.
3. Click Apply.
A message box will be displayed.
4. Click OK.
2.5.17 Utility—System Reset—Reset by the Command
Updates the main system program and data files stored within the PBX using files taken from the SD
memory card, and resets the connected PBX.
This option is only available at Installer level.
2 copies of each of the main system files can be stored on the SD memory card. The names of these
files are as follows:
KX-TDA50
File Name Description
DSSYS Main system data file. Contains all of the current configuration data
for the PBX.
DSSYS_S Backup main system data file
PSMPR PBX program file. Contains the software to run the MPR board of
the PBX.
PSMPR_S Backup PBX program file
KX-TDA100/KX-TDA200
File Name Description
DSYS Main system data file. Contains all of the current configuration data
for the PBX.
DSYS_SUB Backup main system data file
PMPR PBX program file. Contains the software to run the MPR board of
the PBX.
PMPR_SUB Backup PBX program file
KX-TDA600
File Name Description
DLSYS Main system data file. Contains all of the current configuration data
for the PBX.
DLSYS_S Backup main system data file
To Next Page
Loading...
