Panasonic KX-TDA50

2.8 [2] System
336 PC Programming Manual
Default
1
Value Range
1–8
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
None
CTI Make Call—SLT Ring
Specifies whether to ring an SLT when a call is made from CTI, instead of the SLT.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
None
2.8.18 [2-10] Extension CID Settings
Various settings for extension Caller ID can be programmed.
Extension Caller ID Resource-1, 2 (KX-TDA50 only)
Specifies a group of 4 SLT ports that can transfer Caller ID information to connected SLTs.
When the port to which an extension is connected has this feature activated, there will be a short
delay before the extension rings for incoming calls.
Default
Disable