Panasonic KX-TDA50

2.7 [1] Configuration
182 PC Programming Manual
Programming Manual References
None
Feature Manual References
1.6.2 Flash/Recall/Terminate
2.7.18 [1-1] Slot—T1 Port—Channel Command (KX-TDA100/KX-
TDA200/KX-TDA600 only)
Commands for the T1 channels can be programmed.
INS
Puts the channel in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.18 [1-1] Slot—T1 Port—Channel Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
OUS
Takes the channel out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.18 [1-1] Slot—T1 Port—Channel Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)