2.9 [3] Group
390 PC Programming Manual
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
A Panasonic Voice Processing System (VPS) with DTMF Integration can be connected to SLT ports
of the PBX. The SLT ports that are connected to the VPS are called a VM (DTMF) Group. A maximum
of 2 (with the KX-TDA50/KX-TDA100/KX-TDA200) or 8 (with the KX-TDA600) VM (DTMF) Groups
can be programmed.
For more information on Voice Mail groups and DTMF integration, see "1.19.3 Voice Mail (VM) Group"
and "1.19.5 Voice Mail DTMF Integration" in the Feature Manual.
VM DTMF Status Signal—Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is ringing.
Default
1
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
VM DTMF Status Signal—Busy Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is busy.
Default
2
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
None
To Next Page
Loading...
