2.3 Connect
PC Programming Manual 37
To create or edit a profile
• From the Connect menu, select Profile Setup.
2.3.6 Connect—Profile Editor
Allows the creation and editing of profiles of settings required to connect the PC to the PBX by RS-
232C, LAN, modem, or USB.
Note that the order of items in this section corresponds to MPR Software File Version 3.2000 or later
of the Maintenance Console. If using an earlier version, please refer to the PC Programming Manual
that came with that version.
Note
When a profile is edited and saved with a new name, the original profile is not deleted.
The settings are as follows:
The functions of the buttons on this screen are as follows:
To create or edit a profile
1.
From the Connect menu, select Profile Setup.
The Profile Setup window (2.3.5 Connect—Profile Setup) will be displayed.
2. Click New or Edit.
The Profile Editor window will be displayed.
3. Enter a name for this profile.
4. Enter the system password used to connect to the PBX.
5. Select the default connection method.
6. Enter the detailed connection method settings as required. See the tables below for more
information.
Note that it is possible to select connection methods other than the default method when using
this profile to connect to the PBX. For this reason, you can choose to input settings for multiple
connection methods in a single profile. Click the tabs to view the settings for each type of
connection.
7. Click Save.
Setting Description
Profile Name Enter a name used to identify this set of PBX connection settings. This
name must not be the same as another profile name.
System Password Enter the password to log on to the target PBX, if required.
Default Select the default connection method.
Button Function
Save Saves the current profile information.
Cancel Closes the current screen without saving the profile information.
To Next Page
Loading...
