Panasonic KX-TDA50

2.7 [1] Configuration
124 PC Programming Manual
Default
10 × 100 ms
Value Range
0–600 × 100 ms
Maintenance Console Location
2.7.13 [1-1] Slot—PRI Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
ISDN CO / QSIG Master / QSIG Slave—T202
Specifies the maximum time that the PBX waits for a reply after resending the request to use an ISDN
line as a TIE line.
Default
20 × 100 ms
Value Range
0–600 × 100 ms
Maintenance Console Location
2.7.13 [1-1] Slot—PRI Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.13.13 PRIVATE NETWORK FEATURES
ISDN CO / QSIG Master / QSIG Slave—T203
Specifies the length of time to detect no communication status of L2.
Default
100 × 100 ms
Value Range
0–600 × 100 ms
Maintenance Console Location
2.7.13 [1-1] Slot—PRI Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)