2.7 [1] Configuration
PC Programming Manual 167
Feature Manual References
None
Pulse Dial—Pulse % Break
Specifies the % break for pulse digits. This is the ratio between the break (on-hook) signal and make
(off-hook) signal in a pulse dial.
Default
60 %
Value Range
60 %, 67 %
Maintenance Console Location
2.7.16 [1-1] Slot—T1 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
Pulse Dial—Pulse Type
Selects the type of pulse dial transmission appropriate to your area.
Default
Normal
Value Range
Normal, Sweden, New Zealand
Maintenance Console Location
2.7.16 [1-1] Slot—T1 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
Pulse Dial—Pulse Inter-digit Pause
Specifies the length of the pulse inter-digit pause. This allows the telephone company to have enough
time to accept the dialed digits correctly.
To Next Page
Loading...
