2.7 [1] Configuration
194 PC Programming Manual
3. Highlight numbers and click the right arrow to select them for registration. Click Next.
A screen will appear with information on the current IP-PT extension number and index
number for programming.
4. Program the relevant IP-PT.
5. Click Next.
• If the registration is still in process, the dialog box will show "Waiting for IP-PT to
register...". Click OK.
• If the registration is successful, the dialog box will show "Registration Succeed".
If there are more IP-PTs to be registered, click Continue to resume or Cancel to
terminate the registration. If not, click Close.
Once the IP-PT is successfully registered, the status of the IP-PT will update to show
"Registered".
De-registration
Follow the steps below to de-register the IP-PT.
1. Click De-registration.
A dialog box will appear. Registered extension numbers are displayed on the left.
2. Highlight numbers and click the right arrow to select them for de-registration. Click Next.
A dialog box will appear.
3. Click Confirm.
• If the de-registration is successful, the dialog box will show "De-registration Succeed".
• If the de-registration is unsuccessful, the dialog box will show "De-registration Error".
De-registration will be terminated.
4. Click Close.
If the IP-PT is successfully de-registered, the status of the IP-PT will update to show "None".
Forced De-registration
Follow the steps below to forcibly de-register the IP-PT when normal de-registration has been
unsuccessful or IP address settings have been changed or deleted only on the IP-PT.
1. Click Forced De-registration.
A dialog box will appear. Registered extension numbers are displayed on the left.
2. Highlight numbers and click the right arrow to select them for forced de-registration. Click
Next.
A dialog box will appear.
3. Click OK.
A dialog box will appear.
4. Click Confirm.
• If the de-registration is successful, the dialog box will show "Forced De-registration
Succeed".
5. Click Close.
Once the IP-PT is successfully de-registered, the status of the IP-PT will update to show
"None".
Shelf (KX-TDA600 only)
Indicates the shelf position (reference only).
To Next Page
Loading...
