2.8 [2] System
PC Programming Manual 229
Value Range
1–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
None
Dial—Analog CO Call Duration Start
Specifies the length of time between the end of dialing and the start of the SMDR timer for outgoing
analog CO line calls.
Default
0 s
Value Range
0–60 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
Intercept Routing No Answer (IRNA)—Day, Lunch, Break, Night
Specifies the length of time until an unanswered call is redirected to the intercept routing destination
in each time mode.
Note that this setting is only valid for extensions whose Intercept No Answer Time—Day, Lunch,
Break, Night is set to "0".
Default
40 s
Value Range
1–240 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
To Next Page
Loading...
